A 160
- Details
- Category: A Series
- Published on 23 January 2012
- Written by Administrator
- Hits: 69154
The Translink Ranger A 160 is an Aerial Work Platform designed with safety and reliability in mind and to meet and exceed all the International Standards. Its rugged design is especially suited to the demands of maintenance and repair work for both the private and public sectors. The Ranger A 160 is completely interlocked for maximum safety during operations. To find out more: |
![]() |
||||||||||||||||||||||||||
|
A 125 J
- Details
- Category: A Series
- Published on 23 January 2012
- Written by Administrator
- Hits: 69105
![]() |
The Translink Ranger A 125J Materials Handler is an Aerial Work Platform designed in compliance with British Standard BS EN280. The winch assembly complies with US Standards ASME – B30.7 1989 as well as SAE J706a and SAE J881. The Ranger A 125J is completely interlocked for maximum safety during operations. Winch & Jib The Ranger A 125J comes equipped with a Mechanical Jib and Electric Winch with capacity of 100kg. To find out more: |
||||||||||||||||||||||||||||||
|
A 105
- Details
- Category: A Series
- Published on 23 January 2012
- Written by Administrator
- Hits: 71732
![]() |
The Translink Ranger A-105 is an Aerial Work Platform designed with safety and reliability in mind, and to meet and exceed all the International Standards. Its rugged design is especially suited to the demands of maintenance and repair work for both the private and public sectors. The Ranger A-105 is completely interlocked throughout for maximum safety in operation. To find out more: |
|||||||||||||||||||||||||
|
A 125
- Details
- Category: A Series
- Published on 23 January 2012
- Written by Administrator
- Hits: 69081
The Translink Ranger A 125 is an Aerial Work Platform designed with safety and reliability in mind, and to meet and exceed all the International Standards. Its rugged design is especially suited to the demands of maintenance and repair work for both the private and public sectors. The Ranger A 125 is completely interlocked for maximum safety during operations. To find out more: |
![]() |
||||||||||||||||||||||||||
|
A Series
- Details
- Category: A Series
- Published on 18 December 2007
- Written by Administrator
- Hits: 107553
Features of the Ranger A Series Cage Manufactured from Glass Reinforced Plastic insulated against accidental contact up to a test voltage of 3,000v. The cage is fitted as standard with one or two Operator Harness anchor points depending on the model. Knee bars are standard on the access portholes. The cage automatically maintains its horizontal operating position using a mechanical leveling system. Controls Fully hydraulic boom controls. Standard single controls in cage – optional dual controls at base. Stabilisers Full hydraulic 'A' frame stabilisers fitted with foot plates to reduce ground pressures. The stabiliser cylinders are fully protected against external damage, by being contained within rectangular hollow tubes. Interlock valves are fitted as standard. Booms The Articulated booms are designed to provide maximum strength with minimum weight. All boom cylinders are fitted with lock valves as standard to prevent descent in the unlikely event of hose failure, making them "Fail Safe". The booms are interlocked with the stabilisers to prevent elevation until the stabilisers are deployed and the machine is level. Sub-frame The Ranger A Series Models are all fitted with substantial sub-frames designed to take all the loadings imposed by the operation of the booms and transmit them directly to the stabilisers. Power Supply The Hydraulic pump is driven directly from the Vehicle engine via a power take off (PTO). |
![]() |
|||
|