Wash Hose
- Details
- Category: Washer Accessories
- Published on 21 July 2014
- Written by Administrator
- Hits: 87438
Non-Conductive Insulated Wash Hose
![]() |
Flexible Pressure Hose | |
Construction: | ||
Inner Tube - Polyethylene Compound | ||
Braiding - Synthetic | ||
Cover - Polyurethane compound - Pinpricked | ||
Colour - Yellow | ||
![]() |
Properties - Specially designed for live line washing - Heavy duty, wear resistant - Excellent bend radius - Smooth outer coating allows slip free movement, better than rubber hose. - Lengths of up to 200m |
Portable Conductivity Meters
- Details
- Category: Washer Accessories
- Published on 21 July 2014
- Written by Administrator
- Hits: 115718
Portable Conductivity Meters
Product code: IW 410042
- Precision, pocket size meter, hand held Conductivity Meter.
- Range 0 – 2,000 Micro mho/cm (micro siemens/cm).
- Easy to operate, with modern electronics, and sophisticated measuring techniques.
- 9v standard replaceable battery with low battery indicator.
- High quality accurate linear epoxy Probe.
- Fully calibrated prior to despatch.
- Supplied in quality robust, heavy-duty carrying case splash proof and giving full protection.
- ‘Cell K’ Calibration, with simple adjustment, (in the event of damage).
- 3 position switch, ‘ON’ ‘OFF’ ‘Cell-K’.
- Automatic Temperature Compensation (ATC) fitted as standard at 2% °C.
- Temperature range 0 to 50 °C.
Robust splash-proof case |
Probe for remote sampling |
Download the Portable Conductivity Meter brochure here
Download the Portable Conductivity Meter brochure in Spanish here
Conductivity Meters
- Details
- Category: Washer Accessories
- Published on 18 July 2014
- Written by Administrator
- Hits: 79691
|
|
Fixed Conductivity Meters
- Details
- Category: Washer Accessories
- Published on 21 July 2014
- Written by Administrator
- Hits: 81904
Fixed Conductivity Meters - (Permanently fitted to the Washer Unit)
Product code: IW 410040
Probe / Sender Unit (located inside the Tank)
- Precision built Conductivity Meter.
- High quality accurate Epoxy Probe built into the base of the Water Tank.
- Easy to operate with Modern Electronics and sophisticated measuring techniques.
- Probe fitted with 4m of cable to reach the instruments on the operator control panel.
- Water proof, with sealed connection to cable plugs outside the Water Tank.
- All cables complete with compatible fittings at each end.
- Fully calibrated prior to despatch.
- Automatic Temperature Compensation ATC fitted as Standard at 2% °C.
- 12v (supplied from washer unit).
Control Panel Instrumentation
a) Water Monitor
- Clear digital display of water quality in micro mho/cm (micro siemens/cm).
- Test button to check Alarm circuit.
- If water conductivity increases above the pre-set figure either because of water quality or increase in Temperature, the alarm will sound and the test button lights RED.
- Set Point to pre-set water quality.
b) Operator setting controls
- Operator selector switch to select 100, 300, 400, 500 Micro Mho/cm (micro siemens/cm), determined by the Operator Manual.
- Test button to check the figure at which the water quality has been set. When released the display returns to the actual tank water conductivity.
Constant Water Monitor |
Operator Setting Control |
Download the Fixed Conductivity Meter brochure here
Washer Accessories
- Details
- Category: Washer Accessories
- Published on 17 July 2014
- Written by Administrator
- Hits: 64517